Pro Spot's Electric Free Dust Extraction Sanding System
Monday, October 10, 2016
Honda ProFirst Certification Equipment List (High Pressure Spot Welders, Welding Wire, and MIGs)
Friday, October 7, 2016
Honda ProFirst Certification
Equipment List
Below is the welding equipment that a collision repair facility is required to have to meet Honda ProFirst Certification.
Resistance Spot Welders
Honda Required Specification:
Exceeds 9,000 AMPS
Exceeds 772 lbf clamping pressure
i5 SMART Spot Welder
- Shop Air Pressure Meets 135 psi- Approved
- Shop Air Pressure Does Not Meet 135psi- Approved
- Weld Amperage (Max) - 14,500 A
i4 Inverter Spot Welder
- Shop Air Pressure Meets 135 psi- Approved
- Shop Air Pressure Does Not Meet 135psi- Requires PS-600 HP Gun Upgrade
- Weld Amperage (Max) - 12,500 A
i4s Inverter Spot Welder
- Shop Air Pressure Meets 135 psi- Approved
- Shop Air Pressure Does Not Meet 135psi - Approved
- Weld Amperage (Max) - 12,500 A
PR-2000 Resistance Spot Welder
- Shop Air Pressure Meets 135 psi- Approved
- Shop Air Pressure Does Not Meet 135psi- Requires PS-600 HP Gun Upgrade
- Weld Amperage (Max) - 11,500 A
_____________________________________________________________________
PS-600- High Pressure Gun
PS-307 C-Arm (Included with Upgrade)
PS-308 508mm Arm (Included with Upgrade)
To get the PS-600 High Pressure upgrade, be sure to call 877-PROSPOT or contact your local Pro Spot representative.
_____________________________________________________________________
Union X96 High Strength Welding Wire for 590-980MPa
Honda's required welding wire for high strength welding of 590-980MPA. Pro Spot has the only Honda approved wire in the U.S, whose part number is 50-7040.
Caution: There are companies selling wire claiming it to be Honda approved, if concerned please contact Honda directly to find out which companies are providing the approved wire.
_____________________________________________________________________
Pulsed MIG/MAG Welder
Honda Required Specification:
180 AMP minimum output
220 Volt
Pulse Mode
SP-1 Pulse MIG Welder
- 200A
- 220V
- Pulsed Mode
SP-2 SMART Pulse MIG Welder
- 2 Torch (Aluminum & Steel or Silicon Bronze)
- 200A
- 220V
- Pulsed Mode
SP-5 Smart Pulse MIG Welder
- 3 Torch (Aluminum, Steel, & Silicon Bronze)
- 200A
- 220V
- Pulsed Mode
SP-5 DP Smart Pulse MIG Welder
- 3 Torch (Aluminum, Steel, & Silicon Bronze)
- 200A
- 220V
- Double Pulse
- Single Phase
SP-5 Smart Pulse MIG Welder
- 3 Torch (Aluminum, Steel, & Silicon Bronze)
- 200A
- 220V
- Double Pulse
- Three Phase
Pro Spot Shows Brand New Equipment at Maaco Expo
Thursday, October 6, 2016
Pro Spot Shows Brand New Equipment at Maaco Expo
Charlotte, NC (October 6, 2016) – Pro Spot International, manufacturers of quality repair equipment for the collision repair industry, will be exhibiting their products and a new surprise at the Maaco Convention and Tech Expo in Charlotte, NC from October 12-16, 2016.
Pro Spot will have live MIG welding & Dent Pulling. They will also be demonstrating their Hybrid Battery-Operated Welder, the PHS-101, that provides quality spot welds for shops without 3-phase power. Lastly, Pro Spot will be letting Maaco franchisees see first-hand the new Electric-free Dust Extraction Sanding Unit. “Maaco does a lot of body and paint work and they stand behind their workmanship. Our new Dust Extraction Sanding Unit is perfect for shops; it promotes a safe, clean and quality job. It’s sleek, lightweight design will help efficiency in the shop, the shops will love it” said Bob Pluth, Product Support Manager.
For more info on the MAACO Convention & Tech Expo, visit: www.maacoconvention.com
Don’t forget about other upcoming events, including the SEMA Show November 1-4, 2016. Visit Pro Spot in booth 10839.
Pro Spot & Honda Represent Quality in Wisconsin
Pro Spot & Honda Represent Quality in Wisconsin
Fontana, WI (October 5, 2016) – Pro Spot International, manufacturers of welding equipment for the collision repair industry, will be attending the American Honda Parts & Service Zone 8 2016 Fixed Operations Conference at The Abbey Resort in Fontana, WI from October 5-7. 2016.
Pro Spot representatives will be available to discuss Honda approved Pro Spot equipment from Spot Welders to Aluminum Repair tools and more. Pro Spot has been working with Honda for a long time in providing quality equipment that their customers can count on. 
“We are happy to be able to provide the Honda required welding wire for the ProFirst Certified program, the Union X96, to make sure that repairers are using the correct wire to get the job done right!” said Ashley Olsson, Director of Communications.Don’t forget about other upcoming events, including the SEMA Show November 1-4, 2016. Visit Pro Spot in booth 10839.
