Honda ProFirst Certification Equipment List (High Pressure Spot Welders, Welding Wire, and MIGs)

Friday, October 7, 2016


Honda ProFirst Certification 

Equipment List


Below is the welding equipment that a collision repair facility is required to have to meet Honda ProFirst Certification. 

Resistance Spot Welders 

Honda Required Specification:

Exceeds 9,000 AMPS

Exceeds 772 lbf clamping pressure

    i5 SMART Spot Welder
    • Shop Air Pressure Meets 135 psi- Approved 
    • Shop Air Pressure Does Not Meet 135psi- Approved
    • Weld Amperage (Max) - 14,500 A
    i4 Inverter Spot Welder
    • Shop Air Pressure Meets 135 psi- Approved
    • Shop Air Pressure Does Not Meet 135psi- Requires PS-600 HP Gun Upgrade
    • Weld Amperage (Max) - 12,500 A
    i4s Inverter Spot Welder

    • Shop Air Pressure Meets 135 psi- Approved
    • Shop Air Pressure Does Not Meet 135psi - Approved
    • Weld Amperage (Max) - 12,500 A
      PR-2000 Resistance Spot Welder
      • Shop Air Pressure Meets 135 psi- Approved
      • Shop Air Pressure Does Not Meet 135psi- Requires PS-600 HP Gun Upgrade
      • Weld Amperage (Max) - 11,500 A

      _____________________________________________________________________
      PS-600- High Pressure Gun 

      PS-307 C-Arm (Included with Upgrade)
      PS-308 508mm Arm (Included with Upgrade)

      To get the PS-600 High Pressure upgrade, be sure to call 877-PROSPOT or contact your local Pro Spot representative. 

      _____________________________________________________________________

      Union X96 High Strength Welding Wire for 590-980MPa

      Honda's required welding wire for high strength welding of 590-980MPA. Pro Spot has the only Honda approved wire in the U.S, whose part number is 50-7040. 

      Caution: There are companies selling wire claiming it to be Honda approved, if concerned please contact Honda directly to find out which companies are providing the approved wire. 

       _____________________________________________________________________

      Pulsed MIG/MAG Welder

      Honda Required Specification: 

      180 AMP minimum output

      220 Volt

      Pulse Mode
        SP-1 Pulse MIG Welder
        • 200A
        • 220V
        • Pulsed Mode

        SP-2 SMART Pulse MIG Welder
        • 2 Torch (Aluminum & Steel or Silicon Bronze)
        • 200A
        • 220V
        • Pulsed Mode

        SP-5 Smart Pulse MIG Welder
        • 3 Torch (Aluminum, Steel, & Silicon Bronze)
        • 200A
        • 220V
        • Pulsed Mode
        SP-5 DP Smart Pulse MIG Welder
        • 3 Torch (Aluminum, Steel, & Silicon Bronze)
        • 200A
        • 220V
        • Double Pulse
        • Single Phase
        SP-5 Smart Pulse MIG Welder
        • 3 Torch (Aluminum, Steel, & Silicon Bronze)
        • 200A
        • 220V
        • Double Pulse
        • Three Phase

        2 comments:

        Powered by Blogger.
        Back to Top